Acoustic Detailing for Multi Storey Residential Buildings

Upload bởi: dung_yeuck

Mã tài liệu: 203009

Số trang: 51

Định dạng: pdf

Dung lượng file: 1,307 Kb

Chuyên mục: Khoa học công nghệ

Đến trang tải tài liệu này

Info

The 2003 edition of the Building Regulations Approved Document E sets minimum standards of acoustic performance for walls and floors between dwellings (separating walls and floors). The Regulations, which came into effect in July 2003, provide guidance on how the requirements can be met and how compliance must be demonstrated.
There are two methods of demonstrating compliance with the requirements; pre-completion on-site acoustic testing or by using Robust Details (RDs). The RDs have undergone a testing regime to prove that they more than satisfy the requirements of Part E. Information about the RDs is available from Robust Details Limited.
The first edition of RDs is limited in its coverage of steel framed construction details. Therefore, for steel framed residential buildings some pre-completion site testing will be required. This publication gives acoustic details for steel framed buildings with a range of floor and wall constructions. All the details provided are expected to satisfy the requirements of site testing. It has been produced to provide designers, developers and architects with confidence that their projects will pass the testing requirements, provided the details given are used.
Acoustic requirements for ‘non-residential’ buildings are not covered by Part E. Reference should be made to BS 8233, which includes maximum ambient noise targets for a range of buildings, including commercial premises. It also covers minimum noise level targets to ensure privacy in open plan offices etc.
This publication was prepared by Mr A G J Way and Dr G H Couchman of The Steel Construction Institute. Some of the details are taken from or based on information given in SCI Technical Information Sheets P320, P321 and P322, which were written by Dr M T Gorgolewski. The illustrations of Robust Details included in this publication are based on those given in the Robust Details Handbook. Funding for the preparation of this publication was gratefully received from Corus Construction & Industrial.

Phần bên dưới chỉ hiển thị một số trang ngẫu nhiên trong tài liệu. Bạn tải về để xem được bản đầy đủ

GỢI Ý

Những tài liệu gần giống với tài liệu bạn đang xem

Acoustic Waves

Upload: damanhngoc_dan

📎 Số trang: 478
👁 Lượt xem: 488
⬇ Lượt tải: 16

Tìm tài liệu

Info

Phần bên dưới chỉ hiển thị một số trang ngẫu nhiên trong tài liệu. Bạn tải về để xem được bản đầy đủ

GỢI Ý

QUAN TÂM

CHUYÊN MỤC

KhoTri thức số

Về chúng tôi

MENU

LIÊN HỆ

098 333 9285